C Frame Hydraulic Press
C Frame Hydraulic Press for Sale
Working Principle of C Type Hydraulic Press
The hydraulic transmission system of the c frame press machine is composed of power organization, control organization, executive organization, auxiliary organization, and working medium. Oil pumps are usually used as the power organization, generally positive displacement oil pumps. In order to meet the requirements of the movement speed of the executive organization, one oil pump or multiple oil pumps are selected.
- Gear pump for low pressure (oil pressure less than 2.5MP)
- Vane pump for medium pressure (oil pressure less than 6.3MP)
- Plunger pump for high pressure (oil pressure less than 32.0MP)
Features of C Frame Press Machine
- C-shaped steel frame welded open structure, good rigidity, easy to operate.
- The mechanical parts are installed in the fuselage, and the appearance is neat and beautiful.
- The built-in fast cylinder is adopted, the empty stroke speed is fast, and the production efficiency is high.
- Pressure, stroke, speed, and pressurization time can be adjusted according to product requirements.
- With manual, pedal, and other operation modes.
- Machine stroke, pressure can be adjusted within the specified range.
- It can be configured with a calibration table, pressure holding function, ejection performance or hydraulic cushion function, photoelectric protection device, etc.
The Advantages of Zhengxi Hydraulic C Type Press Machine
- The hydraulic circuit and circuit design are simple and easy to maintain.
- The hydraulic control adopts the cartridge valve integrated system, which reduces leakage points, reliable action, and long service life.
- The single-arm hydraulic press has the characteristics of good structural rigidity, good guiding performance, and fast speed.
- C-type hydraulic power press with a convenient manual adjustment mechanism. The pressure head can be adjusted or the upper table can be pressed at any position in the stroke. It is also possible to adjust the length of fast-forward and work-in-progress arbitrarily within the design stroke.
- It adopts hydraulic components and electrical components from Taiwan and Japan, which are durable.
- The lower top cylinder or the left and right clamping cylinders (rear feeding cylinders) can be added according to the production process requirements.
- The electronic control system can be configured as required.
- Non-standard customization is acceptable.
Safe Operation of C Frame Hydraulic Press
1. The operator of the hydraulic press c type can work independently only after training and mastering the equipment performance and operating technology.
2. Before the operation, all kinds of sundries on the mold should be cleaned first, and any dirt on the C-type hydraulic machine rod should be wiped off.
3. The mold of the hydraulic c-frame press machine device is carried out under the condition of power failure, and it is forbidden to collide with the start button, handle, and pedal on the foot switch.
4. Install the centering of the upper and lower molds, adjust the mold gap, do not allow one side to deviate from the center, and test the pressure after confirming that the mold is fixed.
5. Before the operation of the hydraulic press C-type, firstly start the equipment to idle for 5 minutes and check whether the oil level of the fuel tank is sufficient, whether the sound of the oil pump is normal, and whether the hydraulic unit, pipes, joints, and pistons are leaking.
6. Start the equipment to test the pressure, and check whether the pressure reaches the working pressure, whether the equipment moves normally and reliably, and whether there is any leakage.
7. Adjust the operating pressure, but it should not exceed 90% of the rated pressure of the equipment. Test the pressure of a workpiece, and then produce it after passing the inspection.
8. For different single-column hydraulic machine profiles and workpieces, when pressing and correcting, the operating pressure, pressure, pressure holding times, and time of the C-frame hydraulic machine should be adjusted at any time. And the mold and workpiece should not be damaged.
Application of C Type Hydraulic Press Machine
C frame hydraulic press for sale is suitable for embossing, forming, shallow stretching, shaping, and pressure assembly of metal or non-metal parts; motor rotor, stator press-fit, electronic connectors, electrical parts press-fit, glasses, clamping mold, and hardware parts suppression, etc. This series of products are suitable for use in machine tools, internal combustion engines, textile machinery, shafts, bearings, washing machines, automobile motors, air-conditioning motors, electrical appliances, military enterprises, and assembly lines of foreign-funded enterprises.
Request a Quote